top of page

The RAD22 adds flexible I/O capability to RANE DSP systems. It provides two mic and two line inputs via XLR/TRS combination jacks and an 1/8” (3.5mm) stereo line output for monitoring, recording or amplification. Smart muting allows for the disconnecting of XLR and 1/4” cables to prevent disruption to sound systems for hot-swapping of microphones - even with 24V phantom power applied. Connect the RAD22 to RANE DSP with a Cat5e (or better) cable for a local run up to 500 feet (150m) away from the equipment rack.

Each RAD22 may be installed onto a standard U.S. two-gang electrical box, or flush-mounted to a wall surface.

(2) XLR/TRS combo jack inputs with auto-switching for MIC or LINE level inputs
Smart muting enables hot-swapping of inputs without sound system disruption
3.5mm TRS line output for recording, monitoring with headphones, and live sound amplification
RJ45 connection to Rane multiprocessor
Standard enclosure and standard back box mounting options for US, UK and EU
Isolation circuitry prevents hum due to long cable runs with ground differentials
Improved codec for superior audio transmission
Completes the RAD family while complimenting the RAD16z

Input Signal LEDs:
Green LED = 50 dBFS
Red LED = 0.5 dBFS
Microphone Inputs: (Level set in hardware)
Input Impedance: 2.16 kΩ balanced (1.08 kΩ + 1.08 kΩ)
Gain Range (dynamic mic mode): 26 - 46 dB, in 1 dB steps
Gain Range (condenser mic mode): 14 - 34 dB, in 1 dB steps
Max Input (dynamic mic mode): -16 dBu, Gain = 26 dB
Max Input (condenser mic mode): -4 dBu, Gain = 14 dB
Equivalent input Noise: -121 dBu, 20 kHz BW, Rs = 150Ω, Gain = 26 dB
CMRR: -70 dB, Rs = 150Ω, 1kHz, Gain = 26dB
Frequency Response: 20 Hz - 20 kHz, +0, -0.5 dB at all Gain settings
THD + Noise: < 0.010% @ 1 kHz, 20 kHz BW, Rs = 150Ω, Output = -6 dBFS, Gain = 26
Phantom Power: 24VDC, 10mA Max
Digital Codec: 48kHz/24-bit
1/8” (35mm) Output
Impedance: 200Ω, 1%, each leg
Maximum Output: 14 dBu, < 1% THD, 10 kΩ load
Dynamic Range: 106 dB, 0 dBFS, 20 kHz BW, A-weighted
Frequency Response: 20 Hz - 20 kHz, +0.0/-0.5 dB
THD + Noise: 0.008% @ 1 kHz, 20 kHz BW, -6 dBFS output
Dimensions (width x depth x height): 5.6” x 1.4” x 4.8” (143 x 36 x 123mm)
Weight: 0.94 lb (0.45 kg)

Rane RAD22

    bottom of page