top of page

The TURBOSOUND SIENA TSP152AN is a powered two way full range loudspeaker with digital networking designed for a wide range of portable PA applications. The carbon fibre loaded 15" low frequency driver utilizes a specialized voice coil wound on both the inside and the outside of the coil former for higher magnetic density, which results in better cooling, higher power handling, and improved efficiency. The titanium dome 1" neodymium high frequency compression driver is mounted on a low distortion waveguide providing 90° horizontal x 50° vertical dispersion.

As with all TURBOSOUND powered loudspeakers, the TSP152-AN features a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier which provides 2,500 Watts of peak power. A high degree of control over the loudspeaker system's performance is provided by the highly sophisticated KLARK TEKNIK Digital Signal Processing which offers dynamic EQ for impressive full range response at low volume levels, and transparent limiting to ensure the utmost clarity at high output levels, and the assurance of long term reliability. The TurboSound TSP152AN rear panel amplifier module carries a fully featured user interface consisting of a LCD display providing intuitive access to level, EQ, and pre-set frequency contours that optimize response for FOH or floor monitor use, and provides USB remote control and access to the onboard DSP via PC or Mac* Computer.

In addition to the balanced combination Jack/XLR inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the TurboSound TSP152AN is equipped with proprietary ULTRANET technology, using CAT5 cables to transmit pristine quality multi-channel audio signals and other information between ULTRANET enabled products such as digital mixers and personal monitor systems. Mains power is connected via a locking Neutrik powerCON* connector with additional auxilliary mains output to power further SIENA loudspeakers. The TurboSound TSP152AN is fitted with a dual angle pole mount socket, allowing it to be pole mounted straight on or raised higher and angled downwards to optimize audience coverage. The roadworthy 15 mm (5/8") birch plywood cabinet with rugged powder coated perforated steel mesh grille and is fitted with multiple internal rigging points for permanent installations, and is finished in hard wearing semi matte black paint.

TurboSound SIENA PA Speaker Features:

2 way full range loudspeaker for portable PA applications
2,500 Watt power featuring KLARK TEKNIK Class-D technology
KLARK TEKNIK Digital Signal Processing for totalsystem control
ULTRANET digital audio networking connects to mixers and other sources
Carbon fibre loaded 15" low frequency driver with inside/outside wound coil
Titanium dome 1" neodymium motor compression driver
Fully featured user interface with LCD display forease of navigation
USB remote control via PC or Mac* Computer
Low distortion waveguide provides 90° H x 50° V dispersion
15 mm (5/8") birch plywood enclosure, finished in ablack semi-matt textured paint
Rugged powder coated perforated steel mesh grille
Dual angle pole mount for accurate coverage control
Multiple internal rigging points for install applications
Mains input and link output on Neutrik powerCON*connectors
3-Year Warranty Program
Designed and engineered in England

TurboSound SIENA PA Speaker Specifications:
Dimensions (H x W x D):  714.4 x 445 x 358.7 mm(28.13 x 17.52 x 14.12")
Net Weight:  21.6 kg (47.5 lbs)
Components:  1 x 15” (381 mm) LF driver, 1 x 1"(25 mm) HF compression driver
Frequency Response:  58 Hz - 17 kHz ±3dB, 43 Hz -20 kHz ±10 dB
Calculated Max SPL:  136 dB SPL
Construction:  15 mm (5/8”) birch plywood,finished in semi matt black paint
Grille:  Powder coated perforated steel mesh
Amplifier Type:  Class-D
Connectors:  2 x Jack/XLR input, 2 x XLR output,XLR Mix Output, Neutrik powerCON* mains in and mains link, USB, ULTRANET In and Thru
Controls:  Gain (per channel)
Indicators:  Signal, peak, LCD panel

TurboSound SIENA TSP152AN

    bottom of page