top of page

The DVA S30N features a dual 18" subwoofer pairing in a bass reflex housing, the DVA S30N packs a muscular, ultra low-frequency punch. It delivers very powerful performance indeed with a range extending down to the lowest frequencies. This sub-bass powerhouse is the perfect addition to large PAs and an excellent complement to DVA T12 mid-/high-range units in stacked arrays.

This sophisticated hybrid design brings together the benefits of bass reflex and horn systems in a compact housing engineered to render low frequencies with high SPL. The two baffle boards are arrayed in the form of a V. They guide the central bass reflex channel's sound energy into the horn's port. This funneling action is smooth and uniform, greatly increasing its range. The high-quality birch multiplex housing is covered in robust black textured lacquer and equipped with eight grips. On the back, an optional transport dolly can be easily attached via quick-release pins to keep the wheels from rattling.

A dedicated 1.5 kW digipro®G2 digital power amp drives each woofer. With 3,000 W total output power, the DVA S30N delivers 50 percent higher amp performance than is standard for its class. This digipro® technology is so very efficient that there is no need for fans. Lacking mechanical components that require maintenance, this bin operates even more reliably. The amps are equipped with PFC switched-mode power supplies. They are largely impervious to line voltage fluctuations, which is a tremendous asset in a touring rig. digipro® technology also has the weight advantage. Factor the neodymium magnets into the equation and you get a remarkably light and lean rig that couldn't be easier to transport and set up.

The DVA S30 subwoofer features a high-end DSP boasting excellent audio specs. It provides adjustable crossover frequencies, precise limiter functions and variable delay settings for perfect time alignment. A special preset makes it easy to set up cardioid systems with enhanced directivity. All settings are readily adjusted using the rear-mounted rotary encoder. The DSP also provides a X-Over output for connecting mid-/high-range units. Factory-equipped with an RDnet port, the DVA S30 is ready for integration into complex, remotely controlled and monitored DVA T12 sound reinforcement systems. RJ45 inputs and outputs connect it to the RDnet HUB.


RDNet Network
digipro® - Digital Amplifier
RCF Transducer
RDnet network

Speaker Type  Active Bassreflex-Horn Subwoofer
Acoustical data

Frequency Response [+/- 3dB]:  30 - 120 Hz
Max SPL:  141 dB
Directivity:  Omnidirectional, Cardiod Optionwith DSP setup
LF:  2x18 "
Type LF:  RCF
Voice Coil: LF  4 "

Amp Technology:  digipro
Amp Class:  Class D
Power Supply:  3 kW SMPS
LF Amp:  3000 W/RMS
Cooling:  Convection

Controller:  DSP 56 bit
AD/DA Converter:  24bit/ 96 kHz
System Presets:
  -  X-Over
  -  Delay
Phase:  0, 180 °
Limiter:  RMS, Peak, Thermal
Delay Option:  0-4.5 ms internal
Crossover Frequency LF-MF:  DSP, steps of 5Hz
Slope LF-MF:  24 dB/Octave
Input Section

Signal Input:  1x XLR fem, sym.
Network:  RDnet, 2x RJ45
Signal Output:
  -  1x Link XLR, male, sym
  -  1xX-Over Out, XLR male, sym.
Power Socket:  Powercon In
Voltage Range:  90 - 240 V

Housing:  Multiplex birch plywood
Housing Design:  Rectangular
Color:  Black
Surface Texture:  Textured acrylic lacquer
Handles:  4x Per Side
Pole Mount:  No
Front Grille:  1.5mm metall grille
Castors:  Optional
Width:  1100 mm (44 in)
Height:  580 mm (23.2 in)
Depth:  720 mm (28.8 in)
Weight:  83 kg (182.98 lbs)

dB Tech DVA S30N

    bottom of page