The P1108-T is a weatherproof full range, wide-dispersion, two way loudspeaker system suitable for several indoor or outdoor applications where good speech intelligibility and music reproduction are required.

In a single-piece rotational moulded UV protected polyethylene cabinet the P1108-T combines a 1,5” diaphragm assembly compression driver loaded on a 1” rotatable constant directivity 90°x60°CD horn with a 8” high efficiency low-frequency transducer with a 1.5” voice coil.

The cabinet is equipped with 4 x M 8 brass inserts and a steel U-Bracket. The front logo is in aluminium and rotatable.The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing.

P1108-T is suitable for indoor and outdoor installations, it meets the requirements of IP 55 code (International Protection Rating).

FEATURES

100 W RMS
Weatherproof cabinet IP 55
Aluminium grill and stainless steel bracket
One 8" high-output LF transducer with 1.5" voice coil
One RCF Precision 1" Compression Driver with 1.5" voice coil
90° x 60° constant directivity horn
2° x 15° enclosure sides for cluster configurations
PTC Driver Protection
LICC (Low Impedance Compensated Crossover) network
2 metres 4 x 1.5 Input cable

ACOUSTICAL SPECIFICATIONS

Frequency Response -10 dB:80 Hz ÷ 20000 Hz
Max SPL @ 1m:121 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Directivity index; Q:11
System Sensitivity:95 dB
Nominal Impedance:16 Ω
Power Handling:100 W
Peak Power Handling:400 W
Recommended Amplifier:200 W
Protections:Dynamic protection on Compression Driver
Crossover frequencies:2200 Hz

TRANSDUCERS

Compression Driver:1" throat, 1.5" coil diaphragm assembly
Nominal Impedance:8 Ω
Input Power Rating:20 W AES
Sensitivity:107 dB
Woofer:8" woofer, 1.5" voice coil
Nominal Impedance:16 Ω
Input Power Rating:100 W AES
Sensitivity:94 dB

INPUT SECTION

Input connector:4 x 1.5 mm square 2 m Neoprene cable
Constant voltage transformer:70/100
Power Selection:70V/30W, 15W - 100V/60W, 30W

CABINET

Cabinet Material:8 mm Polyethylene rotomoulded
Hardware:4 x M8 + U-Bracket and Pair of spacers
Grille:Custm perforated aluminium grille with open-cell fiber and water repellent woven fabric backing
Color:Grey

PHYSICAL SPECIFICATIONS

Height:266/10.47 mm/inch
Width:493/19.40 mm/inch
Depth:250/9.84 mm/inch
Net Weight:12,5/27.55 kg/lbs